The Roller Kitfrom Mr Door ProGet the kit · $12
Which roller does your door take? Drags · grinds · jumps the track

Find the right roller for your door, and swap it yourself.

Know your exact roller before you buy. Swapped in an afternoon. $12.

There are many sliding door rollers, and the wrong one makes the door wander and jump its track. Five things tell you the right one: the housing size, the wheel size and material, a grooved or flat edge, one wheel or two, and where the screw goes. The kit shows you how to read yours, where to buy it, and the swap step by step, usually with the panel standing in its track. Screen door rollers too.

★★★★★161 Google reviews · From Mr Door Pro, Orlando · The right roller, or your money back

A sliding door Mr Door Pro repaired, moved with one finger
A door we fixed: now it slides with one finger.
The cover of The Roller Kit

The Roller Kit

From Mr Door Pro. By email right after you pay: the steps, the videos and your photo assistant.

What you get

Everything to find the right roller and put it in.

  • Is it the rollers? The signs, in a 2-minute check
  • Identify yours: the five measurements that name the right roller, and where to buy it
  • The swap with the panel standing in its track (aluminum doors), and the 2x4 method for screws under the glass
  • When the panel has to come out: out, new rollers, back in
  • The Stuck-Screw Sequence, for rusted roller screws
  • Screen door rollers: check them, match them, replace them
  • 3 short videos from our jobs: the rollers, the panel out, the track
  • Your photo assistant: send photos of your old roller, it tells you what it sees and walks you through the swap
The Roller KitOne payment. No subscription.$12

$12 is less than one good roller ($25 to $40). A Mr Door Pro visit starts at $120, and a new sliding door costs $3,000 to $6,000.

Your kit goes here.

Every other repair on the same door (optional)
Total today$12

Secure payment by Stripe · Your kit arrives by email right after you pay · 30-day money-back guarantee

What’s inside

No theory. Identify, buy, swap.

  1. Is it the rollers? · 2 minutes

    Lifting the door to slide it, the panel almost touching the track, a screw that turns and nothing moves, grinding. A table tells you.

  2. Identify yours

    Photos from the side and the back, then five measurements: housing, wheel, edge, one or two wheels, screw position. That names the right one.

  3. Where to buy it, and which quality

    Home stores carry the common sizes; online parts stores match the rest. Builder-grade $5 to $10, ball-bearing $25 to $40.

  4. The swap, panel standing

    On most aluminum doors one side piece comes off and the panel stays in its track. One person does it.

  5. When the panel comes out, or a screw is stuck

    Out of the head track and back in, and the Stuck-Screw Sequence for rusted screws.

  6. Screen door rollers

    The small spring-loaded wheels at the corners: check them, match them, replace them. An hour or less.

Cleaning the bottom track of a sliding door
The track, cleaned.
Working on the rollers of a sliding door
The rollers, at the bottom corners.
A sliding door moved with one finger after the repair
Done: it slides with one finger.
Davi, the owner of Mr Door Pro, working on a sliding door track
Davi, on a Mr Door Pro job in Central Florida.
By someone who does this every day

We fix sliding doors in Orlando. This is how.

I’m Davi. I own Mr Door Pro, and fixing sliding doors is all we do. Every step in this kit is how we do it on real jobs, written down for one job: finding the right roller, and putting it in.

“Davi did a great job fixing the sliding door that had bugged my wife for the last 4yrs. Quick service, reasonable prices. Would recommend.”Aaron W. · Google review

“I got an appointment for an estimate right away and they were able to fix my door at the same time. Davi was prompt, efficient and pleasant.”Tracy M. · Google review

Real reviews of Mr Door Pro on Google: 161 reviews, 5.0 rating.

The right
roller or
money back

The right roller, or your money back.

If you follow the kit and your door still doesn’t glide on its new rollers, write to us within 30 days and we refund every dollar.

Near Orlando? We come and fix it: free estimate at your home.

Questions
Which roller does my door take?

Measure the old one the way the kit shows: housing length, width and thickness; wheel size and material; grooved or flat edge; one or two wheels; where the screw goes. Send the photos and measurements to your assistant. Still not sure? Reply to your kit’s email and we tell you exactly which one to buy.

My door is old. Can I still find one?

From the 1970s or 80s? The exact model may be gone, but there is always one that replaces it: a roller with the same housing height and width. That is the one to look for.

Does the panel have to come out?

Usually not. On most aluminum doors one side piece comes off and the panel stays standing in its track. Vinyl doors and some others come out: the kit shows how, with a helper for a heavy panel.

Do I need special tools?

Phillips and flat screwdrivers, pliers, a stiff putty knife, a rubber mallet, a short piece of 2x4, a vacuum and the new rollers. The kit lists every one.

How long does it take?

Our technicians take about two hours per panel, cleaning included. Plan half a day for your first one.

The roller screw is rusted stuck.

Never force it with a drill: that is what strips it. The kit’s Stuck-Screw Sequence goes from the gentlest fix to the last resort, in order.

Is it for screen doors too?

Yes. Screen door rollers are the small spring-loaded wheels at the corners. The kit shows how to check them, match the new ones and put the screen back.

What if it still doesn’t glide?

If you follow the kit and your door still doesn’t glide on its new rollers, write to us within 30 days and we refund every dollar. Near Orlando? We do it for you: free estimate at your home.

I have a hurricane (impact) door.

Those panels are much heavier, their rollers are usually tandem and the panel has to come out with two people and glass suction lifters. For most people it is a job for a pro. Send your assistant a photo first.

How do I get it? Is it a subscription?

No subscription: $12, one payment. Right after you pay, an email arrives from diy@mrdoorpro.com with the kit as a PDF and the link to your videos and your photo assistant.

The Roller Kit

The right roller, swapped in an afternoon.

$12, one time. The right roller, or your money back.

Get the kit · $12
Get the kit · $12