The Lock Kitfrom Mr Door ProGet the kit · $12
Sliding door won’t lock? Latch misses · lever loose · key stuck

Make your sliding door lock again.

Most locks are fixed in a few minutes, with a screwdriver. $12.

You push the lever and nothing catches, so the house stays open at night. Most locks that stop working are not broken: the panel has sagged, and a quarter inch of sag is enough for the hook to miss the keeper. The kit’s check shows you what the hook is doing, then the fix: set the panel height, slide the keeper, or swap a worn latch, lock or handle with an exact match.

★★★★★161 Google reviews · From Mr Door Pro, Orlando · It locks again, or your money back

A sliding door Mr Door Pro repaired, moved with one finger
A door we fixed: now it slides with one finger.
The cover of The Lock Kit

The Lock Kit

From Mr Door Pro. By email right after you pay: the steps, the videos and your photo assistant.

What you get

Everything to make it lock again.

  • The 2-minute check: sagged panel, moved keeper, worn latch or a dry cylinder
  • Fix 1: set the panel height, so the hook meets the keeper
  • Fix 2: line up the latch and the keeper
  • The X-Ray Lock Check: see what the hook is doing, with the handle off
  • Replace a mortise lock or a handle: how to match yours, measured center to center
  • Until it’s fixed: how to keep the house secure tonight
  • Your photo assistant: send photos of your lock and keeper, it tells you what it sees and walks you through the fix
The Lock KitOne payment. No subscription.$12

$12 is less than one good roller ($25 to $40). A Mr Door Pro visit starts at $120, and a new sliding door costs $3,000 to $6,000.

Your kit goes here.

Every other repair on the same door (optional)
Total today$12

Secure payment by Stripe · Your kit arrives by email right after you pay · 30-day money-back guarantee

What’s inside

No theory. The steps, in the order we use them.

  1. The 2-minute check

    Close the door slowly and watch where the latch meets the keeper. Look at the gap at the jamb. A table sends you to the fix your lock needs.

  2. Set the panel height · about ten minutes

    A quarter turn at a time on the adjustment screws, until the gap is even and the hook meets the keeper.

  3. Line up the latch

    Still off? Loosen the keeper, slide it up or down to meet the latch, and tighten it again.

  4. The X-Ray Lock Check · a few minutes

    Handle off, door closed from outside, lever up: you see where the hook misses. A technician charges $120 to $150 for this.

  5. A new latch, lock or handle

    Match the faceplate, the screw spacing center to center and the hook direction. The most common handle spacing is 3-15/16 inches.

  6. Until it’s fixed

    A wooden dowel or a security bar in the bottom track keeps the house secure tonight.

The latch and handle of a sliding door
The latch and the handle.
Working on the rollers of a sliding door
The rollers, at the bottom corners.
A sliding door moved with one finger after the repair
Done: it slides with one finger.
Davi, the owner of Mr Door Pro, working on a sliding door track
Davi, on a Mr Door Pro job in Central Florida.
By someone who does this every day

We fix sliding doors in Orlando. This is how.

I’m Davi. I own Mr Door Pro, and fixing sliding doors is all we do. Every step in this kit is how we do it on real jobs, written down for one job: a sliding door that won’t lock.

“Davi did a great job fixing the sliding door that had bugged my wife for the last 4yrs. Quick service, reasonable prices. Would recommend.”Aaron W. · Google review

“I got an appointment for an estimate right away and they were able to fix my door at the same time. Davi was prompt, efficient and pleasant.”Tracy M. · Google review

Real reviews of Mr Door Pro on Google: 161 reviews, 5.0 rating.

It locks
or your
money back

It locks again, or your money back.

If your door still won’t lock after you follow the kit, write to us within 30 days and we refund every dollar.

Near Orlando? We come and fix it: free estimate at your home.

Questions
Do I need special tools?

A screwdriver for most of it. Graphite powder for a sticky key. A new latch, lock or handle only if yours is worn: the kit shows how to match it.

How long does it take?

The check takes 2 minutes. Setting the panel height takes about ten. A hook that just misses the keeper is a few minutes with a screwdriver.

Is my lock broken?

Usually not. Most locks that stop working have a sagged panel, and a quarter inch of sag is enough to miss the keeper. The kit’s check tells you which it is.

Which lock or handle do I buy?

Match the faceplate shape, the distance between the screw holes measured center to center, and the direction of the hook. Send the photos to your assistant. Still not sure? Reply to your kit’s email and we tell you exactly which one to buy.

My key won’t turn.

Puff graphite powder into the cylinder and work the key a few times. Never WD-40: it gums up the lock.

What if it still won’t lock?

If your door still won’t lock after you follow the kit, write to us within 30 days and we refund every dollar. Near Orlando? We come and fix it: free estimate at your home.

I have a multi-point hook lock or a hurricane door.

For a hook lock with several points, or an impact-rated door, the guide says to call a pro. Send your assistant a photo first.

How do I get it? Is it a subscription?

No subscription: $12, one payment. Right after you pay, an email arrives from diy@mrdoorpro.com with the kit as a PDF and the link to your videos and your photo assistant.

The Lock Kit

Most locks are fixed in a few minutes.

$12, one time. It locks again, or your money back.

Get the kit · $12
Get the kit · $12